All Midi, All Analog, All Real-time, All Performance Step Sequencer
- 24 Banks
- of 8 Sequences
- of 8 Steps
- of 7 Parameters
- And Multiple Virtual Sequences
- Per-Step Note, Pitch, Velocity, Controller Value
- Per-Step Duration and Note Duration
- Per-Step Slew Rate
- A Full-Featured Three Channel Polyphonic MIDI to CV Converter
|
Sequencer Specifications
|
Real-time Interface
Real-time Flexibility
- Continuous turn "encoder" knobs and LCD display for instantaneous access to any parameter
- Displays step parameters using bar graphics, octaves, en-harmonics, or numbers
- Perform from the sequencer using its panel keys to trigger sequences or...
- Perform the sequencer remotely using MIDI
Sequence Step Matrix
Moves beyond a simple MIDI Tracker
- Real-time sequence step modes:
note, scale, detune, velocity, controller, step duration, note duration, slew rate
- Force step note to one of 50 musical scales
- Step notes are tuneable to 3.125 cents 'un-quantized' resolution
- Sequences output selected MIDI controller numbers 1 to 95
- Per-step slew rate for MIDI pitch-bend slew or portamento output
- Sequence Loop and Link for long patterns up to 1536 steps
and multiple instances thereof
- Sequencer cross-modulation:
A sequence may modulate another sequence's pitch, velocity, controller and event times
Modulation routes by channel allow additive, global and recursive sequence modulation
- Random step advance and pendulum modes
- Per-bank and global BPM tempos
- 32 channel MIDI output
- Control Voltage modulation input for sequence transposition, velocity or step time
Variable Event Times and Durations
Moves beyond the traditional Analog Sequencer
- Internal sequencer resolution is 96ppq
- Per-step step and note durations:
Note off and step skip to 64th to dotted whole note durations
- Ability to create polyphonic sequences with any combination of chord and single note
- Sync triggers to beat or free-time, independent to each sequence
- Bar Sync syncs sequence loop to bar length, independent to each sequence
- Poly-rhythms are easily generated with Bar Sync
- Step fractional time-shift modulation via sequence modulator or CV input
- Programable external clock sources and timing resolution
Dynamic Sequence Triggering
Makes this the Performance Sequencer
- Concurrent triggering of each bank group of 8 sequences,
with multiple virtual sequence iterations
- Additive or global sequence modulation
- Recursive sequence modulation
- Sequencer trigger sources:
Sequences are panel key assignable and MIDI channel or note assignable.
Sequence iterations track MIDI trigger note, velocity, note duration, and note instances
- Triggers sync to beat or free-time; create MIDI echo
- Sequencer trigger modes:
Multiple
sequences follow all trigger instances
Single
sequence follows monophonic trigger
Duration Follow
sequence note duration follows trigger duration
Loop Hold
sequence loops while trigger is held
Run/Stop
trigger play; trigger stop
Seq Reset
trigger play; trigger reset sequence
Release
trigger sequence_n; sequence_n+1 on trigger release
Step Play  
trigger plays the next successive step
Step Record
trigger sets step value
Step Randomize
trigger sets random step values
Polyphonic MIDI to Control Voltage Converter Features (MCV)
Superb Analog Voice Control
- 3 channels of full-featured MIDI to Control Voltage conversion
- Authentic mono synth emulation with 8 finger note buffer
- Configurable output ports
- 10 octave linear note range
- Volts/Octave or Volts/Hertz output scaling
- Low / High / Last note priority
- Re-trigger and Recycle note modes
- Linear or Exponential portamento slew
- Mono and polyphonic pitch bend modes with variable pitch bend width
- Velocity and MIDI controller support with 16 curve modifiers, inversion and scaling
- Three programmable MIDI input channel zones
Other Analog Ports
Flexible Analog or MIDI Sync
- Analog Clock in at 4ppq and 24ppq
- Analog Clock out at 2ppq
- Analog Drum Sync out at 24ppq
- MIDI clock in and out at 24ppq
- External Foot Switch input for remote bank changes
- External Foot Pedal/CV input for sequence modulation
File Data Exchange
- MIDI file dump data
- Flash upgradeable OS
Specifications: Input / Output
Control Voltage
3 CV out, 3 Gates out, 1 CV in
MIDI
in, out 1, out 2 or through
Analog Drum Sync 24
clock and trigger out (DIN plug)
Analog Clock Sync
in (TRS ring) and out (TRS tip)
External Foot Switch
input
External Foot Pedal
input (TRS tip doubles for CV in)
Power
15VDC @ 500mA (adapter supplied)
Graphic Display
2 X 20 character back-lit LCD
Dimensions
28 X 18.6 X 8 cm
Sequencer Revision two User's Manual
Rev C2.0 Manual (800K pdf)
Sequencer Scales
Scales Table
home |
specs |
demos |
community |
upgrade |
order |
module
Copyright © 2005 Signal Arts Technologies.
All Rights Reserved
|